GPS tracker, locator for all vehicles
Features that already exist
⚫ Tracking: It sends GPS (Location, speed) and sensors (if any) information to your application server with configurable report interval (moving or stationary).
⚫ Geofence: It supports circle and polygon setting
⚫ Backup Battery (optional): With a backup battery (300mAh), the device sends a tamper message if the main power supply harness is disconnecte
⚫ Over Speed Limit: Reports over-speed limit.
⚫ 3-Axis Accelerometer: With a built-in 3-axis accelerometer, the device can detect trip start/trip end, and to report harsh braking, harsh acceleration, and impact.
⚫ Storing Message: The device stores up to hundreds of messages while there is no GSM signal.
⚫ Low Voltage Detection (optional): Device switches to deep sleep mode if supply voltage drops below a threshold.
⚫ Power Saving Mode: Device periodically wakes up and sleeps when vehicle engine is OFF.
⚫ Expand other peripherals: Plenty of IOs, UARTs and AD to accomplish custom`s requirement.
⚫ OTA (Over the Air): The device`s firmware can be upgraded via TCP.
⚫ Waterproof Case: IPX65 waterproof.
⚫ Bluetooth-positioning: It will support bluetooth feature for positioning.
⚫ Mileage: Reports trip start, trip end and the mileage.
⚫ CAN Communication: It can read VIN, RPM and many other standard
vehicle parameters via CAN BUS.
⚫ GPIO and UART: The device has 5 configurable IOs. It can be
configured as 3 digital inputs, 2 digital outputs; 2 digital input, 1
analog input and 2 digital outputs; 1 digital input, 1 analog input, 1
digital output and 1 UART. These IOs can be used for engine starter
on/off detection, immobilization of engine starter, door lock, and for
connecting to various types of sensors.
Other functions can be customized
