● Tracking: It sends GPS (Location, speed) and sensors (if any) information to your application server with
configurable report interval (moving or stationary).
● Geofence: It supports circle and polygon setting.
● Backup Battery: With a backup battery (400mAh), the device sends a tamper message if the power
supply harness is disconnected.
● Over Speed Limit: Reports over-speed limit.
● Mileage: Reports trip start, trip end and the mileage.
● 3-Axis Accelerometer: With a built-in 3-axis accelerometer, the device can detect trip start/trip end,
and to report harsh braking, harsh acceleration, and impact.
● Storing Message: The device stores up to 300 messages if out of coverage and send the stored
messages once the device regains coverage.
● Power Saving Mode: Device automatically switch to low-power mode when it detects engine is OFF.
● GPIO and UART: The device has 5 configurable IOs. It can be configured as 3 digital inputs, 2 digital
outputs; 2 digital input, 1 analog input and 2 digital outputs; 1 digital input, 1 analog input, 1 digital
output and 1 UART. These IOs can be used for engine starter on/off detection, immobilization of engine
starter, door lock, and for connecting to various types of sensors.
● OTA (Over the Air): The device’s configuration, setting and firmware can be remotely upgraded.
